Presentation; Dear Customer; Design And Features; Ts60 - Husqvarna TS60 US Manual De Instrucciones

Dear customer!

Thank you for choosing a Husqvarna product!
It is our wish that you will be satisfied with your product and
that it will be your companion for a long time. A purchase of
one of our products gives you access to professional help with
repairs and services. If the retailer who sells your machine is
not one of our authorised dealers, ask him for the address of
your nearest service workshop.
This operator's manual is a valuable document. Make sure it
is always at hand at the work place. By following its content
(using, service, maintenance etc.) the life span and the
second-hand value of the machine can be extended. If you
ever lend or sell this machine, make sure that the borrower or
buyer gets the operator's manual, so they will also know how
to properly maintain and use it.
More than 300 years of innovation
Husqvarna AB is a Swedish company based on a tradition
that dates back to 1689, when the Swedish King Charles XI
ordered the construction of a factory for production of
muskets. At that time, the foundation was already laid for the
engineering skills behind the development of some of the
world's leading products in areas such as hunting weapons,
bicycles, motorcycles, domestic appliances, sewing
machines and outdoor products.
Husqvarna is the global leader in outdoor power products for
forestry, park maintenance and lawn and garden care, as well
as cutting equipment and diamond tools for the construction
and stone industries.
Owner responsibility
It is the owner's/employer's responsibility that the operator
has sufficient knowledge about how to use the machine
safely. Supervisors and operators must have read and
understood the Operator's Manual. They must be aware of:
• The machine's safety instructions.
• The machine's range of applications and limitations.
• How the machine is to be used and maintained.
Local regulations could restict the use of this machine. Find
out what regulations are applicable where you work before
you start using the machine.
The manufacturer's reservation
Subsequent to publishing this manual Husqvarna may issue
additional information for safe operation of this product. It is
the owner's obligation to keep up with the safest methods of
operation.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
For customer information and assistance, contact us at our
website: www.husqvarna.com
4 –
English

PRESENTATION

Design and features

Values such as high performance, reliability, innovative
technology, advanced technical solutions and environmental
considerations distinguish Husqvarna's products. Safe
operation of this product requires the operator to read this
manual carefully. Ask your dealer or Husqvarna should you
need more information.
Some of the unique features of your product are described
below.

TS60

Softstart™
Softstart™ is an electronic current limiter which provides a
softer start.
Elgard™
Elgard™ is an electronic overload protection that protects the
motor. The protection spares the machine and extends its
service life. With the help of Elgard™, the machine indicates
when it approaches maximum load.
Lightweight and mobile design
The machine is lightweight and compact. The carry handles
on the frame and transportation wheels make the machine
easy to carry and move. The integrated wheels allow the saw
to be pulled like a roller bag.
The stand is foldable and height adjustable.
Jet stream containment system with slurry
protection
The patented Jet stream system provides the conveyor cart
and the blade with water in a closed system.
The slurry sinks to the bottom and only surface water reaches
the pump, which is placed in a protected compartment of the
water tray.
The conveyor cart is continuously supplied with water. The
water suppply to the blade is adjustable.
Flexible cutting
Flexible plunge cutting and miter cutting up to 45°.
Enables cutting of 20"x20" mm (500x500) tile diagonally
giving a cutting lenght of 28" (718 mm).
Functional conveyor cart and side table
The conveyor cart is extra long for better support when
cutting. The side table is removable.
Large blade flange
The large size blade flange Ø 3"(82 mm) provides a large and
good support surface for the blade.