Fit The Blade - Husqvarna TS60 US Manual De Instrucciones

ASSEMBLING AND ADJUSTMENTS

Fit the blade

• Loosen the lock knob. Open the blade guard.
• Hold down the button for locking the blade shaft.
• Remove the nut. Remove the blade flange.
• Check that the blade, blade flange and blade shaft are
undamaged. Clean the contact surfaces of the blade and
the blade flange.
• Make sure that the blade will rotate in the direction
indicated by the arrow on the blade.
• When mounting the blade pull out the spray nozzle and
move it from or towards the centre axle depending on the
size of the blade(10" or 8" blades).
• Fit the blade, blade flange and nut.
• Close the blade guard. Tighten the locking knob.
– 11
English