medical implants. To decrease the risk of serious
injury or death, we recommend persons with medical
implants to speak to their physician and the medical
implant manufacturer before operating this product.
•
Keep the product clean. Make sure that you can
clearly read signs and decals.
•
Do not use the product if it is defective.
•
Do not do modifications to this product.
•
Do not operate the product if it is possible that other
persons have done modifications to the product.
Always use common sense
WARNING: Under no circumstances should
you modify the original design of the
machine without approval from the
manufacturer. Always use original spare
parts. Unauthorized modifications and/or
accessories may lead to serious injury or
death to the user or others.
WARNING: The use of products such as
cutters, grinders, drills, that sand or form
material can generate dust and vapours
which may contain hazardous chemicals.
Check the nature of the material you intend
to process and use an appropriate breathing
mask.
It is not possible to cover every conceivable situation
you can face when using a drilling machine. Always
exercise care and use your common sense. Avoid all
situations which you consider to be beyond your
capability. If you still feel uncertain about operating
procedures after reading these instructions, you should
consult an expert before continuing. Do not hesitate to
contact your dealer or us if you have any more
questions about the use of the drilling machine. We will
willingly be of service and provide you with advice as
well as help you to use your drilling machine both
efficiently and safely.
Do not hesitate to contact your dealer if you have any
more questions about the use of the machine. We will
willingly be of service and provide you with advice as
well as help you to use your machine both efficiently and
safely.
Let your Husqvarna dealer check the drilling machine
regularly and make essential adjustments and repairs.
Husqvarna Construction Products has a policy of
continuous product development. Husqvarna reserves
the right to modify the design and appearance of
products without prior notice and without further
obligation introduce design modifications.
All information and all data in the operator's manual
were applicable at the time the operator's manual was
sent to print.
6
Safety instructions for operation
WARNING: Read the warning instructions
that follow before you use the product.
•
Do not operate the product unless you can get aid if
an accident occurs.
•
Do not use the product in bad weather, such as fog,
rain, strong winds, intense cold and equivalent
conditions. Dangerous conditions, such as slippery
surfaces, can occur because of bad weather.
•
Look out for persons, objects and situations that can
prevent safe operation of the product.
•
When the drill points up during operation, always use
an applicable container to collect the water.
•
Always attach the product to an applicable drill stand
before operation. Refer to
drill stand on page 8 .
•
Make sure that you always can stop the motor
quickly in an emergency.
•
Make sure that there are no pipes or electrical
cables in the area where the hole will be made.
•
If the product does not operate correctly, stop the
motor.
•
Make sure that you are in a safe and stable position
during operation.
•
Stay at a distance from the drill bit when the motor is
on.
•
Do not go away from the product when the motor is
on.
•
Always disconnect the power cord before you go
away from the product.
•
Keep all parts in good condition and make sure that
all fixtures are correctly tightened.
•
If vibrations occur in the product or the noise level
from the product is unusually high, stop the product
immediately. Examine the product for damages.
Repair damages or let an approved service agent do
the repair.
•
Always use approved accessories. Speak to your
dealer for more information.
Extension cables
•
Use only approved extension cables with sufficient
length.
•
The rated value on the extension cable must be the
same or higher than given on the rating plate of the
product.
•
Use grounded extension cables.
•
When you operate the product outdoors, use an
extension cable that is applicable for outdoor
operation. This decreases the risk of electrical
shock.
•
Keep the connection to the extension cable dry and
off the ground.
To attach the product to a
1320 - 001 - 14.10.2019