Tennant T1 Manual Del Operario página 9

FIG. 16
FOR SAFETY: When operating machine, if foam or
liquid begins to leak from machine, immediately
shut off machine.
8. For heavily soiled areas, press the scrubbing mode
switch towards the brush/solution mode (Figure
17). This allows you to use the double scrub
method. First scrub the soiled area in the
brush/solution mode then scrub the area a second
time in the vacuum/brush/solution mode.
FOR SAFETY: Before operating machine, place wet
floor signs as needed.
FIG. 17
Tennant T1 (03- 08)
9. The brush circuit breaker will trip if the brush is
obstructed. To reset the circuit breaker, unplug the
power cord, remove the obstruction and reset the 5
amp circuit breaker button (Figure 18). If the circuit
breaker does not reset immediately, allow the
motor to cool.
FOR SAFETY: Before removing obstruction from
brush unplug power cord from wall outlet.
FIG. 18
10. When transporting machine, raise the scrub head
to the transport position (Figure 19).
FIG. 19
FOR SAFETY: When transporting machine, do not
wheel up or down stairs.
OPERATION
EN
9