Malaguti SPIDER MAX GT500 Manual De Uso página 121

3.11.1 FUNCTION SELECTION - WARNING OR ALARM SIGNALS
To make the display easier to understand, functions are organ-
ised in menus and sub-menus.
Menus
Sub-menus
Warning and alarm signals need not be selected. They appear
automatically when the alarm condition arises.
Function selection and use is possible using the MODE button (4
- Fig. 17), situated on the front side, on the right handlebar control.
Hold the button down more or less to select one function or an-
other.
Sub-menu functions are always accessible, irrespective
of the menu that has been opened.
Choice of the speedometer's unit of measurement (km or miles)
can only be made from the relative selection menu, when the
battery is connected to the vehicle. When selecting a unit of meas-
urement, strictly adhere to the rules in force in your country.
3.11.2 SECONDARY MENU OR SUB-MENU
A B
Access to
Setup menu (fig. 16c)
(only with vehicle at a
standstill)
A) TOD FUNCTION (total km or mile speedometer):
B) TD FUNCTION (trip - partial km or mile speedometer):
ENGLISH
MODE key not
pressed for 5"
C D
Partial count resetting Access to
(not permitted if the Main Display selection (fig. 16d)
Menu is on Route Memory) (only normal / reverse selection)
• This indicates the total distance trav-
elled.
This value is never reset and remains
even after the vehicle is turned off.
• This indicates the partial distance trav-
elled in km or miles.
To reset, hold the MODE button down
until the display is showing 000.0 . The
counter is automatically reset when
999.9 km are reached. Counting will
thus be resumed from 000.0.
1
2
Fig.16a
3
4
5
6
15