Cycle Overview; Timed Dry - Whirlpool Vantage WED7990XG Manual De Uso

CYCLE OVERVIEW

The main screen has 5 tabs, each with several automatic cycles. Each tab allows you to select automatic
cycles based on what you want to dry, for example, by clothing type, color, or common household items.
The RECENT tab lists the last 7 cycles used and saves any customized settings applied to these cycles.
To select a cycle, touch the tab the cycle is in (see Cycle Chart on next page), then touch the
arrows until the desired cycle is shown. Then simply touch the cycle icon to select. For additional
information on each cycle and recommended loads, touch LEARN MORE.
Automatic Cycles
If you select Adjust Settings, manually choose and adjust each
setting individually using the buttons across the bottom of the
screen. If an option is not available, it will be grayed out and
cannot be selected. To change settings from the cycle defaults,
touch Adjust Settings.
Use Automatic cycles for Better Fabric Care and Energy Savings
Use the Automatic Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic Cycles,
drying air temperature and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer
shuts off when the load reaches the selected dryness. With Timed Dry, the dryer runs the amount of time set and could result in
shrinkage, wrinkling, and static due to over-drying with certain fabrics. Use Timed Dry for the occasional damp load that needs
a little more drying time, when using the drying rack, or for items that require drying without heat such as rubber, plastic, and
heat-sensitive fabrics.
6

Timed Dry

If you select Timed Dry, you can set a specific amount of drying
time and drying temperature. When a Timed Cycle is selected,
the Estimated Time Remaining display shows the actual time
remaining in your cycle.
and