Using Your Dryer - Whirlpool Vantage WED7990XG Manual De Uso

USING YOUR DRYER

WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this dryer.
Before using your dryer, wipe the dryer drum with a damp cloth
to remove dust from storing and shipping.
1.
Clean the lint screen
Clean the lint screen before each load. A screen blocked
by lint can increase drying time.
IMPORTANT:
Do not run the dryer with the lint screen loose, damaged,
blocked, or missing. Doing so can cause overheating and
damage to both the dryer and fabrics.
If lint falls off the screen into the dryer during removal, check
the exhaust hood and remove the lint.
1. The lint screen is located in the front of the dryer. Pull the lint
screen straight up to remove. Roll lint off the screen with your
fingers. Do not rinse or wash screen to remove lint. Wet lint is
hard to remove.
2. Push the lint screen firmly back into place.
2.
Load clothes evenly into dryer
Load garments evenly in dryer drum.
IMPORTANT: Do not tightly pack dryer. Items need to
move freely. Tightly packed loads can lead to poor drying
performance, and may increase wrinkling and tangling.
3.
Touch POWER to turn on dryer
Touch the POWER button to turn on the dryer. When you open
the door, the drum light will turn on.
9