DURAVIT 610000 Manual De Instrucciones página 27

Problem
Rearwash/Ladywash
Switching between
the Rearwash and
Ladywash takes too
long.
The water spray
intensity is too weak.
The temperature of
the shower water is
not warm enough.
Potential cause
When switching between
Rearwash and Ladywash,
the spray wand moves
back and then forward
again after self-cleaning is
complete.
The water spray intensity
has been set to "Low".
The water supply hose has
buckled.
The water temperature has
been set to "Off" or "Low".
Solution
This is normal.
> Select the "Water spray
intensity" option on the
remote control 11
the water spray intensity.
> Contact your installer to have
this checked.
> Adjust the water temperature
at the remote control (see
chapter 6).
EN
to adjust
25