Fault Warnings - Sime HOME PLUS Manual De Instalacion Y Uso

– Press the encoder
click
move to the next "data/value"
Start: 05 02 2014 15 : 00
Stop:
Enable holiday:
Hot water OFF - Heat. OFF (nofrost active)
Cancel
– Rotate the encoder
basis of the holiday start date
– Press the encoder
click
move to the next "data/value"
– Continue in this way until all the necessary modifications
have been made
NB: The user must work in a CIRCULAR manner ("rounda-
bout") therefore, ALWAYS MOVING FORWARDS, even if a mis-
take has been made.
– When all modifications have been made, press the button
to go back to the item "Holiday function"
Confirm
– Press the button
Esc
Zone
Menu
50
to confirm the modification and
HOLIDAY SCHEDULE
DAY MONTH YEAR HOUR
05
20 02 2014 15 : 00
NO
Confirm
to modify the "data/value" on the
to confirm the modification and
to go back to the "main screen" .
Th 21 Sept 2014 10:30
Hot water 48°C eco
Winter automatic - set 20.0°C until 7.30
Mode
4.3.3

Fault warnings

If a fault occurs, the screen "Anomaly in progress" will ap-
pear in place of the "main screen".
For the main fault codes, a brief description and suggestions
for the user are displayed based on the seriousness and the
frequency with which the fault reappears.
ANOMALY IN PROGRESS
5 - Technical problem
Contact customer service
Name: xxxxxxxx
Phone:yyyyyyyyy
Esc Back
The fault maybe a transient (volatile) fault or a fault which
blocks the appliance.
To restore normal operating conditions:
– if the fault is transient, eliminate the cause of the fault
– if the fault causes a block, eliminate the cause of the fault
and then press the button
If there is no water in the system or low water pressure in the
there will be a request to fill the system and then press
system
the button Confirm rather than
ANOMALY IN PROGRESS
2 - Low pressure
Fill the system as per boiler's manual instruction
Esc Charge
EN
ANOMALY IN PROGRESS
6 - No flame detection
Reset boiler
Esc Reset
Reset .
Reset .
CONFIRM REQUEST
Confirm operation?
Cancel Confirm