Bosch MaxoMixx MSM8 Serie Instrucciones De Uso página 14

en Multifunction accessory
Sample recipes:
Bread dough
Basic recipe
– 200 g flour
– 120 ml water
– 7 g sugar
– 7 g margarine
– 0.5 g yeast
– 4 g salt
Tool: kneading hook
■ Add all ingredients except the water to
the container.
■ Mix ingredients on Turbo speed.
■ After a few seconds add the water
through the filling opening.
■ Process everything on Turbo speed.
Maximum switch-on time: 45 seconds
Maximum quantity: 1x basic recipe
Short pastry
Basic recipe
– 200 g flour
– 100 g margarine or butter
(room temperature)
– 100 g sugar
– 1 egg
– ½ packet baking powder
– 1 packet vanilla sugar
– 1 pinch salt
Tool: kneading hook
■ Add all ingredients to the container.
■ Mix ingredients on Turbo speed.
■ Chill the pastry dough.
Process further if required.
Maximum switch-on time: 2 minutes
Maximum quantity: 1x basic recipe
Carrier disc with disc inserts
Slicing insert – coarse
Set speed control to low speed
to slice: cucumbers, carrots and potatoes.
Slicing insert – fine
Set speed control to low speed to
slice: cucumbers, carrots, beetroot and
courgettes.
14
Shredding insert – medium
Set speed control to high speed to shred:
apples, carrots, cheese and white cabbage.
Grating insert – coarse
Set speed control to high speed to
grate: potatoes for dumplings and potato
pancakes; fruit and vegetables for salads.
It must not be used for grating carrots.
Caution!
The disc inserts must not be used for
cutting up very hard foods (Parmesan
cheese, chocolate).
The disc inserts are only suitable to a
limited extent for processing fibrous foods
(leek, celery and rhubarb).
W Risk of injury from sharp blade!
Exercise particular caution when handling
the inserts! Note the shape and position of
the insert when inserting into the carrier disc
(X Fig. D). Take hold of the carrier disc by
the designated recessed grips only. Do not
reach into the filling opening. Only use the
pusher when adding more ingredients.
X Fig. F
1. Fit the required insert into the carrier
disc.
2. Place the container on a stable, smooth
and clean work surface. Grasp the
carrier disc by the recessed grips and
insert.
3. Place the lid on the container (.) and
rotate anti-clockwise until it clicks into
position.
4. Place the base unit on the gear
attachment and press until it clicks into
position.
5. Set the required speed with the speed
control. Insert the mains plug.
6. Hold the base unit. Press ON button Ã.
The appliance remains switched on as
long as the button is pressed.
7. Add the food to be processed to the
feed chute. Cut up very large pieces
beforehand. If required, push down
the pusher by applying light pressure.