Makita DLM431 Manual De Instrucciones página 9

Ocultar thumbs Ver también para DLM431:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5
► 1. Inner flange 2. Rotational direction arrow 3. Outer
flange 4. Bolt 5. Mower blade
To install the mower blade, take the removal procedure
in reverse.
WARNING:
Install the blade carefully. It has
a top/bottom facing. Place the blade so that the
rotational direction arrow faces outward.
WARNING:
Tighten the bolt clockwise firmly
to secure the blade.
WARNING:
Make sure that the blade and all
the fixing parts are installed correctly and tight-
ened securely.
WARNING:
When you replace the blades,
always follow the instructions provided in this
manual.
Installing the grass basket
1.
Remove the lock key.
2.
Lift the rear guard of the mower body.
3.
Hook the grass basket on the groove of the mower
body as shown in the figure.
1
2
3
4
► 1. Hook 2. Groove 3. Grass basket
Firmly hold the lawn mower handle with both hands
when mowing.
The outside edges of the front wheels is the guideline
for mowing width. Using the two front wheel outside
edges as a guideline, mow in strips, overlapping by
one half to one third the previous strip, to mow the lawn
evenly.
Periodically check the grass basket for mowed grass.
Empty the grass before it becomes full. Before every
periodical check, be sure to stop the mower then
remove the lock key and the battery cartridge.
9 ENGLISH
1
OPERATION
Mowing
WARNING:
Before mowing, clear away sticks
and stones from mowing area. Furthermore, clear
away any weeds from mowing area in advance.
WARNING:
Always wear the safety goggles or
safety glasses with side shields when operating
the mower.
NOTE: Using the mower with the grass basket full
prevents smooth blade rotation and places an extra
load on the motor, which may cause breakdown.
2
3

Publicidad

Tabla de contenido
loading

Tabla de contenido