1. INSTALLATION AND USER INSTRUCTION GUIDE
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND
RETAINED FOR FUTURE REFERENCE.
2. IMPORTANT SAFETY INSTRUCTIONS
When using this electrical appliance, basic precautions should be followed to
reduce the risk of fire, electric shock, and injury to person, including the following:
• This heater must be used on an AC supply only and the voltage marked on the
heater must correspond to the supply voltage.
• Do not switch the appliance on until it properly installed as described in this
manual.
• The heater must not be located immediately below a socket outlet.
• Keep furniture, curtains and other flammable material at least 1 meter away from
the appliance. Never closed to curtains and other combustible material, otherwise
may cause risk
• Do not leave the appliance unattended during use.
• Do not leave the appliance unattended whilst connected to the mains supply.
• This appliance is intended for household use and should not be used for industrial
purposes.
• From time to time, check the cord for damage. Never use the appliance if the cord
or any part of the appliance shows signs of damage.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
• Do not operate this appliance with a damaged plug or cord, after a malfunction or
after being dropped or damaged in any way.
• Repairs to electrical appliances should only be performed by a qualified
electrician.Improper repairs may place the user at serious risk.
• Do not run the mains cable under carpets, rugs etc.
• Do not allow the mains cable to hang over sharp edges or come into contact with
hot surfaces.
103
FR
FR
ES
ES
PT
PT
IT
IT
EL
EL
PL
PL
UA
RU
RO
KZ
EN
UA
RO
BR
EN