Safety Notes; Setting Up The Amplifier; Operating Elements And Connections; Front Panel - Monacor PA-803USB Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
PA Mixing Amplifier with MP3 Player
Please read these instructions carefully prior to
operation and keep them for later reference. All
operating elements and connections described can
be found on the fold-out page 3.
Connection of the speakers (chapter 4.2, items
21 and 22) requires adequate technical knowledge
in 100 V PA technology and is to be made by
experts only. Operation of the amplifier is easy,
even for adults without any expert knowledge.
However, in case of any queries, please contact
your installer or retailer.

1 Safety Notes

The unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The unit is supplied with hazardous
mains voltage. Leave servicing to
skilled personnel only and do not
insert anything into the air vents!
Inexpert handling or modification of
the unit may cause an electric shock
hazard.
During operation, there is a hazard of contact at the
speaker terminals (21) with a dangerous voltage
up to 100 V. Always fold down the protective cover
(22) when operating the amplifier. Always switch off
the amplifier before making any connection.
G
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity and heat (admissible ambient tempera-
ture range 0 – 40 °C).
G
Do not place any vessels filled with liquid, e. g.
drinking glasses, on the unit.
G
Immediately disconnect the mains plug from the
mains socket if
1. there is visible damage to the unit or to the
mains cable,
2. a defect might have occurred after a drop or
similar accident,
3. malfunctions occur.
The unit must in any case be repaired by skilled
personnel.
G
Never pull the mains cable to disconnect the
mains plug from the mains socket, always seize
the plug.
G
For cleaning only use a dry, soft cloth, never use
chemicals or water.
G
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
6
other purposes than originally intended, if it is not
correctly connected or operated, or not repaired
in an expert way.
2 Applications
The amplifier PA-803USB with integrated MP3
player and an RMS output power of 30 W is e. g.
suitable for the use in small PA systems. In addition
to the mains operation, also a 12 V operation is
possible (e. g. with a car battery) so that it is also
suitable for mobile applications. Either use 100 V
.
speakers or low impedance speakers (minimum
impedance 4 Ω) [see figs. 3a and 3b].
The amplifier is equipped with 3 inputs:
– Microphone input MIC 1 for important announce-
ments taking priority over all other inputs, i. e.
with a signal present at the input, the signals of
the other inputs will be faded out (automatic
talkover)
– Microphone input MIC 2
– Input AUX / PHONO e. g. for CD player, radio,
tape deck or turntable

3 Setting Up the Amplifier

The amplifier can be set up as a tabletop unit or be
fixed at a suitable place, e. g. below a shelf, by
means of the supplied mounting brackets which are
laterally screwed to the housing. In order to ensure
a sufficient cooling of the amplifier, air must always
be able to flow freely through all air vents.

4 Operating Elements and Connections

4.1 Front panel

1 Display of the MP3 player: Shows the title num-
ber and the time already played of a title
2 Button RPT to switch between:
– Continuous repeat of all titles
indication: REP
– Repeat of the current title
indication REP
– Replay of the titles in a random order
indication: A
– No repeat function
indications REP and A extinguished
If the unit is to be put out of operation
definitively, take it to a local recycling plant
for a disposal which is not harmful to the
environment.
ALL
1

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

17.4650

Tabla de contenido