Advanced Disc Operations; Sound Adjustment - JVC KD-AR5000 Manual De Instrucciones

Ocultar thumbs Ver también para KD-AR5000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

When playing a CD-R or CD-RW
• Use only "finalized" CD-Rs or CD-RWs.
• Some CD-Rs or CD-RWs may not play back
on this unit because of their disc
characteristics, and for the following causes:
– Discs are dirty or scratched.
– Moisture condensation on the lens inside
the unit.
– The pickup lens inside the unit is dirty.
• CD-RWs may require a longer readout time
since the reflectance of CD-RWs is lower
than that of regular CDs.
• Do not use following CD-Rs or CD-RWs:
– Discs with stickers, labels, or protective
seal stuck to the surface.
– Discs on which labels can be directly
printed by an ink jet printer.
Using these discs under high temperatures or
high humidity may cause malfunctions or
damage to discs. For example,
– Stickers or labels may shrink and warp a
disc.
– Stickers or labels may peel off so discs
cannot be ejected.
– Print on discs may get sticky.
Read instructions or cautions about labels and
printable discs carefully.
Changing the source
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select "CD" for the playback
source, disc play starts from where it has
been stopped previously.
ImageLink
• ImageLink will not work in the following
cases:
– If no <jll> file is included in an MP3/WMA
folder.
– If Intro Scan is activated.
– If the source is changed to another from
"CD."
– If more than one <jll> file are included in a
folder, a file with the youngest file number
is used for the graphic screen.
Ejecting a disc
• If the ejected disc is not removed within 15
seconds, the disc is automatically inserted
again into the loading slot to prevent it from
dust. (Disc will not play this time.)
○ ○ ○ ○ ○ ○ ○ ○ ○

Advanced Disc Operations

Locating a track or on a disc
• You can skip 10 tracks at a time only if there
are more than 10 tracks in a disc or in a
folder.
○ ○ ○ ○ ○ ○ ○ ○ ○

Sound Adjustment

General
• If you are using a two-speaker system, set the
fader level to "00."
• Subwoofer out setting takes effect only when
a subwoofer is connected.
• You cannot make the input level—Volume
Adjustment—of the FM stations. If the
source is FM, "Fix" will appear when you try
to adjust it.
Storing your own sound modes
• If you do not want to store your current
adjustment, but only to apply the adjustment
to the current playback source, press
"BACK" repeatedly to go back to the
operation screen of the current source.
Adjustment you made remains effective until
you select a sound mode.
○ ○ ○ ○ ○ ○ ○ ○ ○
Graphic Displays
Downloading (or deleting) files
• You can download a file only while selecting
"CD" for the playback source; on the other
hand, you can delete a file while selecting
any source.
• If you have already downloaded an animation
for "OPENING," "ENDING," or "MOVIE,"
downloading a new animation deletes the
previously stored animation.
47

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kd-lhx500

Tabla de contenido