Function - Fermax CITYLINE DUOX Serie Manual De Instalador

DUO DUO DUO DUO DUOX CITYLINE KIT 3-24L X CITYLINE KIT 3-24L X CITYLINE KIT 3-24L X CITYLINE KIT 3-24L X CITYLINE KIT 3-24L
DUO DUOX CITYLINE KIT 3-24L DUO X CITYLINE KIT 3-24L X CITYLINE KIT 3-24L X CITYLINE KIT 3-24L
DUO DUO X CITYLINE KIT 3-24L
Audio settings
While the audio channel is open the audio's volume can be regulated via a contextual menu
on the screen. In order to set the audio, press MENU and a menu screen appears for this
setting.

FUNCTION

F1
Auto-Start:
Notes:
- Auto-start can only be done with the indicated panels. If you can not perform the auto-start,
ask your installer.
- After completing any communication with a panel, for the following 15 seconds if you re-press
the auto-start button it will connect with this panel.
Door lock-release
When a call is received from the entry panel, you can open the door
at any time, by pressing the button
Answering a call:
When the call button on the Entry Panel is pressed a call tone
sounds both on the panel and on the monitor, causing the screen
to start up.
You can pick up the phone receiver and have a conversation with the street
panel. The communication will automatically terminate after 90
seconds, or at any time by hanging up the phone.
If communication is not established (picking-up the receiver) with the entry
panel, the monitor will automatically turn off after 30 seconds.
In the audio settings, use the + and - buttons to
increase or decrease until reaching the desired
setting.
With the monitor in standby
button "camera"
of performing the auto start with different panels
by sequentially pressing
- Panel 0: Panel 0 of the monitor's corres-
ponding block.
- Panel 1: Panel 1 of the monitor's corresponding
block.
- Panels G: This is the 0 Panel configured as
General Entrance.
press the auto start
. It will display the possibility
:
Page 33