Conversation Mode Confi Guration; F1 Auxilliary Function - Fermax iLoft VDS Manual De Instalador Y Usuario

iLoft VDS iLoft VDS
Conversation Mode Confi guration
Within the conversation menu, you can select the Simplex
and Hands free mode.
The hands free mode is selected as default.
Simplex Mode: press the audio activation button to talk,
«MENU» button, and release to listen.
Hands free

F1 auxilliary Function

The F1 key and connection allow you to confi gure the
operating mode. You can select between the Negative
send mode (output) and SOS to MDS Guard unit (input).
Initially confi gured by default as an output, and sends
a negative.
If the other option is selected in conjunction with an MDS/
VDS decoder (version V10.26 or above) a panic alarm
can be sent to the MDS guard unit. Upon pressing F1
the corresponding command is sent by the bus. The F1 connection also acts as an input, so
when connecting a keypad to this, pressing it it also sends the panic command to the MDS
guard unit.
negative send mode
Note: If confi guring the Day Panic mode on the Guard unit, it automatically confi gures the
Panic Call mode on the monitor/s. Upon deactivating the mode on the guard unit, it
also deactivates it on the monitors.
you can select the simplex mode
by pressing the right arrow
you can select the panic mode by
pressing the right arrow
Simplex mode
the left arrow disables the
simplex mode
panic call mode
the left arrow disables the
panic call mode.
Page 11