Machine Statuses; Manual Switching-On; Programmed Automatic Switching-On; Stand-By Temporary Switching-On - Gaggia CONCETTO Instrucciones De Uso

12.1

Machine statuses

With regard to the power supply, the machine can have the
following statuses:
Off and electrically insulated
- Main switch (18) and all-pole switch on the "0" position
(or plug disconnected).
- Only the memory for the programmed data storing is enabled.
On
- Main switch (18) and all-pole switch on the "I" position (or
plug connected).
- All the functions are enabled and the display (8a) is on.
In standby mode (machine switched off but not electrically
insulated):
- Main switch (18) is on "I" position.
- The following functions are enabled: "AUTOM. SWITCHING-
ON", "ANTI-FREEZING", if selected, and "CLOCK", as
well as the display and the memory for the programmed data
storing.
- The display's backlight is off.
12.2

Manual switching-on

This switching-on is necessary when the machine is in the "off
and electrically insulated" status (Pr. 12.1). Proceed as
explained is Pr. 11 excluding, in case, the beverage brewing
check.
12.3 Programmed automatic
switching-on
The machine has to be on "STANDBY" and the function "AUTOM.
SWITCHING-ON" has to be enabled.
The machine will automatically switch-on at the programmed time.
12.4

Stand-by temporary switching-on

Manual switching-on when the machine on "STANDBY".
Press and hold the button
The machine will automatically return on "STANDBY", 60
minutes after the last operation.
CONCETTO
for 3 seconds.
32/120
English