V1-Fan; Stand-By - Dal Zotto Valli idro Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

NO FUEL:
Š the stove can never develop a suitable flame, tending to remain very low even at high powers.
Š at minimum power the stove tends to almost switch-off taking the stove into "
Š when the stove displays the "
EXCESS FUEL:
Š the stove develops a very high flame even at low power.
Š the panoramic glass is very dirty, obscuring it almost totally.
Š the burn pot tends to become encrusted, blocking the holes for air intake due to the excessive pellet feed, as it is only
burned partially.
The regulation to be performed is a percentage. Therefore a modification of this parameter will lead to a proportional
variation of all stove feeding speeds. Feeding is from -30% to +20%.
Follow the procedure on the display to perform this adjustment:
CONTROLS PROCEDURE
Press the key 6, Set cLOcK will appear.
Š
Š
Press key 2 several times until "uSer" is displayed
Press key 6.
Š
"Set therMOStAt" will appear
Š
Press key 2 until "PeLLet" is displayed.
Š
Use key 4 to increase and 5 to decrease the load during the WORk
Š
phase.
Press key 6 to confirm and 1 to return to the previous menus
Š
back to the initial status.

v1-fAn

This menu allows (in models where provided) adjusting the front fan speed percentage.
CONTROLS PROCEDURE
Press the key 6, Set cLOcK will appear.
Š
Press key 2 several times until "uSer" is displayed
Š
Press key 6.
Š
"Set therMOStAt" will appear
Š
Press key 2 until "v1 fAn" is displayed.
Š
Use keys 4 to increase and 5 to decrease
Š
Press key 6 to confirm and 1 to return to the menu
Š
back to the initial status.

StAnD-by

The Stby function is used if immediate stove switch-off or modulation via additional external thermostat is desired.
CONTROLS PROCEDURE
Press the key 6, Set cLOcK will appear.
Š
Press key 2 several times until "uSer" is displayed
Š
Press key 6.
Š
"Set therMOStAt" will appear
Š
Press key 2 until "StAnD by" is displayed.
Š
Use keys 4-5 to enable/disable.
Š
Press key 6 to confirm and 1 to return to the menu
Š
back to the initial status.
" alarm, there may be non-burned pellets inside the burn pot.
nO PeLLetS
| engLiSh
" alarm condition.
nO PeLLetS
1
69

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Frida idroJole idroMarta idro

Tabla de contenido