Würth WAC 1200 PLUS Manual De Instrucciones página 16

Press ENTER to continue, the following screen is displayed:
The machine will recover the remaining refrigerant from the hoses, then the machine will be
back to the MAIN MENU.
Turn the main switch (I) to the 0 position.
NB – The automatic procedure can be run even if the A/C system is empty. In this case the
machine begins the vacuum operation immediately.
NOTE: If STOP is pressed during recovery, the following screen will be displayed:
When START is pressed the procedure resumes, whereas when STOP or RESET is pressed
you go back to the MAIN MENU.
pag.16 - 12/6/2016
INSTRUCTIONS MANUAL
EMPTYING HOSES
Please wait...
Procedure paused.
START to continue
STOP to abort procedure