Faults - What To Do - Gaggenau VL 200 120 Manual De Instrucciones

Faults – What to Do?
9
WARNING
F a u l t s – W h a t t o D o ?
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only
be carried out by an authorized servicer. If the
appliance is not functioning properly, unplug the
power cord or switch off the fuse in the fuse box.
Contact Customer Support.
Disruption
The appliance does not work
After the appliance has been
switched off, the illuminated ring
slowly flashes white three times and
an audible signal sounds.
After the appliance has been
switched off, the illuminated ring
rapidly flashes white six times and
an audible signal sounds.
The appliance switches itself off
while in use; the illuminated ring
flashes orange and white alternately
Appliance runs in automatic mode,
illuminated ring flashes orange
--------
Possible cause
No connection to the remote fan
unit.
Power failure
Faulty fuse
The metal grease filter is saturated. Clean the metal grease filter.
The activated charcoal filter in the
remote fan unit is saturated.
Safety switch off:
The controls on the appliance have
not been used for a long time
The appliance remains off after a
power failure
Automatic sensor is faulty
Faults often have simple explanations. Please read the
notes in the table before calling customer service.
Solution
Check whether the plugs of the connection
cable are properly inserted.
Check whether other kitchen appliances
are working.
Check in the fuse box to make sure that the
fuse for the appliance is in working order.
~ "Cleaning and maintenance"
on page 15
Change the activated charcoal filter in the
remote fan unit. ~ "Cleaning and main-
tenance" on page 15
Turn the control knob to 0, then switch it
back on (if you wish to continue using the
appliance)
Turn the control knob to 0, then switch it
back on (if you wish to continue using the
appliance)
Turn the control knob to 0, then switch it
back on
If the illuminated ring continues flashing
after you have switched the appliance back
on, contact the after-sales service
en-us
Faults – What to Do?
17