Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Playing Images Back
Getting Started
Turning the Power On in the Playback Mode
• Make sure the lens barrier is closed.
• Press the monitor button.
Standby mode
If the camera is left untouched for three minutes when using the
batteries, it automatically turns off. It is strongly recommended, however,
that you switch power off promptly when you are finished using the
camera.
When using new batteries, it may take longer for the camera to shut
down automatically depending on the type of batteries being used.
Turning the Power Off in Playback Mode
Press the monitor button.
Displaying Images Frame by Frame
Press the monitor button with the lens
Battery check
Record mode
barrier closed to turn on power in
Print reserve
Protect
playback mode and display the last
Movie
Monitor
image taken. Images will be displayed
on the monitor, along with the
HQ
information in the right diagram.
Pressing
on the arrow pad displays
the previous image,
the next
image,
the 10th image back,
the
23. 12. '00
10th image ahead.
23:45
124
Time
Frame number
Date
Displaying All Frames (Index-Display Setting)
Press the monitor button with the lens barrier closed to turn on power in
playback mode and display the last image taken. Push the zoom lever
to W to display the last several frames taken. In the index-display
setting, press
on the arrow pad to display the previous set of frames
from the upper left corner, or press
to display the next set from the
lower right corner. Press
to select a frame to the left on the display, or
to select a frame to the right. Pull the zoom lever toward T to display
a full-sized version of the selected image.
12
Publicidad
Tabla de contenido
