Olympus Camedia C-990ZOOM Manual De Instrucciones página 20

Connecting your Camera to a Computer with
a Computer Cable
Computer Operating Environment
IBM PC/AT compatibles (As of June 2000)
OS : Windows 98SE/98/95/NT 4.0/2000 professional
CPU : Pentium or better
Available hard disk space : at least 30MB
Memory : at least 32MB
Serial port : Standard RS-232C interface
Type : D-SUB 9-pin
256 color or better, at least 800 × 600 dots.
Monitor :
Using a 32000 color monitor or better is recommended.
Apple Macintosh (As of June 2000)
OS : Mac OS 7.6.1 ~ 9.0.4
CPU : PowerPC or later
Available hard disk space : at least 30MB
Memory : at least 32MB
*Serial port : Printer port or modem port
256 color or better, at least 800 × 600 dots.
Monitor :
Using a 32000 color monitor or better is recommended.
*Not available for models with USB ports such as iMac and iBook.
For an iMac or other computer equipped with only USB port, use a
SmartMedia reader/writer software application.
Connecting your Camera to a Computer
Use the appropriate connector to your computer.
1 Preinstall CAMEDIA Master 2.0 on your computer.
• For installation details, see the CAMEDIA Master online
instructions.
2 Make sure the power on both the computer and the camera is turned
off before connecting.
3 Attach the provided RS-232C PC serial cable to the serial port
(COM1 or COM2) on your computer.
4 Open the connector cover on the camera and connect the computer
cable to the computer connector on the camera.
5 Turn on your computer.
IBM PC/AT
20
RS-232C PC
serial cable
D-SUB 9-pin
serial port
Computer
connector