Olympus S-DVD-100 Manual Del Usuario página 21

Finalizing will enable the disk to be read in a DVD/CD drive of a PC other than the unit.
(The data cannot be read in a general DVD player, DVD recorder and etc.,)
Finalizing will prevent the disk from being written onto or rewritten.
"Share disk creation" (g page 27)
• Using a blank disk which has not been formatted.
• After setting your camera to "CREATE SHARE DISK," docking the camera
will automatically format the disk, save all image in your camera, and
finalizing.
• Formatting up to 1 min
• Storing
speed /
• finalizing approx. 7-15 min
• Storage function speed / ×image rotation / ×protecting set, reset / ×erase
Incompatible
Recommended
• Formatting
up to 1 min
• Storing speed /
• finalizing approx. 2-6 min
• Storage function
speed / ×image rotation / ×protecting set, reset / ×erase
Incompatible
*4
When a file is stored, a certain constant area is used. If you store a lot of small files, the volume of data that can be stored
on the disk may be considerably lessened.
*5
Erasing an image using the storage function is only possible on these disks: DVD-RW/DVD+RW/CD-RW. The unit is only
compatible with "ERASE," so even if you select "ALL ERASE," only the first image will be erased.
If you execute "All ERASE," the next image may take a long time to display, which may cause malfunction.
Types of disks to store data and use with this unit
mode(Using with a camera)
*4
capacity
*4
capacity
*1
PC mode
"Using with a PC" (g page 30)
• Use the OLYMPUS Master and
B's CLiP6 software supplied into
your PC
Formatting, date writing, and
finalizing of a disk set in the unit can
be accomplished from your PC using
B's CLiP6 software. For details, refer
to the B's CLiP6 help.
Note
Disk formatted using software and
other than B's CLiP6 software and
other than formatted in UDF1.5 cannot
be used for the Dock&Done unit.
EN-21