Olympus S-DVD-100 Manual Del Usuario página 31

About B's CLiP6
B's CLiP6 is packet-writing software (writing of file units is in much the same way as writing to removable
media or floppy disk) which reads and writes data stored in DVD-RW/DVD+RW disks.
Before you use OLYMPUS Master software, you need to install B's CLiP6 software on your PC. You cannot
use B's CLiP6 with any other packet-writing software at the same time. Be sure to uninstall any other packet-
writing software on your PC before you install B's CLiP6 software.
B's CLiP6 is included on the supplied CD-ROM. Insert the supplied CD-ROM into the computer's CD-ROM
drive and install B's CLiP6 following the instructions appearing on the monitor.
For details on B's CLiP6 software, refer to the B's CLiP6's help.
Installing B's CLiP6 software onto your PC
1
Select "B's CLiP6" from the Setup screen.
2
Click [Next].
3
Click [YES] after reading the License Agreement.
Before using a PC
EN-31