Using With A Digital Camera - Olympus S-DVD-100 Manual Del Usuario

mode

Using with a digital camera

When you dock a Dock&Done-compatible digital camera on the cradle that is docked to the unit, you can store
image files onto the disk in the unit automatically. When a printer is connected to the unit, you can print image
files as specified in the print order information with a single action.
Tips
• The unit automatically stores only the new image files taken with the digital camera.
• You can also copy all the image files in the digital camera onto the disk in the unit by simple operations via the digital
camera.
• Image files moved or renamed using a PC cannot be restored back to the digital camera connected to the unit.
• Once stored from a Dock&Done-compatible digital camera, the image files cannot be stored again even if the camera is
connected to another Dock&Done-compatible storage unit.
• The IR-300 is equipped with built-in memory. If a memory card is inserted in the IR-300, the image files on the memory
card are stored. If you want to store the data in built-in memory, remove the memory card.
Preparing for Dock&Done mode
Note
Make sure that the power of the unit is off before connecting with other components or AC adapter.
The digital camera IR-300 (sold separately) and the printer P-S100 (sold separately) are used for the following
explanations. Items displayed on the camera monitor, the function, the shape of the body and cradle differ
depending on the digital camera.
Note
Before using the IR-500, we strongly recommended upgrading the firmware of IR-500. For details on upgrading, refer to the
Olympus website indicated on the back cover of this manual.
EN-22
mode