Error messages
Error messages
Error message
DISK FULL
NO DISK
INVALID DISK FORMAT
STORING ERROR
DISK IS NOT BLANK
INVALID DISK
EN-40
Error code
10001
There is insufficient free disk space.
:Insert a blank disk and continue the auto
storing. If share disk mode is selected, delete
unnecessary images in the digital camera,
and continue.
10002
A disk has not been inserted in the unit.
: Insert a disk into the unit and re-perform
operations.
10003
An incompatible disk or un-formatted disk has
been inserted.
:Before using DVD-R/DVD+R/DVD-RW/
DVD+RW/CD-R/CD-RW disks, they
should be formatted using format function of
"Dock&Done" mode or formatted in
UDF1.5 format using the included B's
CLiP6 software.
10004
An error occurred while you were storing the
images.
:Remove the digital camera from the cradle
and switch the unit off, then back on. Dock
the digital camera back on the cradle.
10005
A disk which is not a blank disk has been
inserted when "CREATE SHARE DISK"
function is activated.
: Insert a blank disk and re-perform
operations.
10008
An incompatible, un-finalized, or un-writeable
disk has been inserted.
:Replace the disk with a compatible one for
storing.
Explanation