Olympus S-HD-100 Manual Del Usuario página 19

8
Select the desired store option on the digital camera.
A Press the a/c button to select the desired item.
DOCK MODE
STORE PRINT
STORING ONLY
STORE SEL. PRINT
EXIT
20SEC. TILL AUTO-STORE
"STORE : PRINT": Stores only the image files newly taken in the digital camera, and prints the
image files according to the print order information.
"STORING ONLY": Stores only the image files newly taken in the digital camera.
"STORE : SEL.PRINT"*: Stores only the image files newly taken in the digital camera, and the
print setting screen appears.
"EXIT": Closes the "QDOCK MODE" menu without storing or printing.
* The print settings are similar to those available in PictBridge mode. For details on the print
settings, refer to the reference manual supplied with the digital camera.
The storage unit starts storing image files automatically if no menu operation is performed within 20
seconds. Available print options on the menu vary depending on the print order set and the printer
connected.
B
Press the 9 button.
The ACCESS indicator (blue) blinks while storing (the ACCESS indicator on the printer blinks
while printing.)
Notes
• Do not turn off the storage unit, or disconnect its cable while the ACCESS indicator (blue) is blinking, otherwise a
store or print error may result. The status of storing/printing or error messages are displayed on the LCD screen of
the camera (g page 27).
• Do not remove the camera while the ACCESS indicator (blue) is blinking. In this case, use the camera to cancel the
process before removing.
Tips
• If the camera is set on the cradle improperly, a save operation will launch automatically after a certain delay. In this
case, printing will not be performed even if a print reservation has been made.
• To cancel storing/printing, press the 9 button on the camera, select "CANCEL," then press 9 in the confirmation
screen. When storing/printing is canceled, the camera will turn off and automatically enter charge mode.
• Print order information is not cleared automatically when a print is executed. Cancel the print order setting
manually.
• If the storage unit is in the Dock&Done mode, the connected digital camera and the printer are not accessible from
the connected PC.
QDock&Done mode
a c buttons
9 button
EN-19