Using The Digital Camera And The Printer With A Pc - Olympus S-HD-100 Manual Del Usuario

4
Turn the power on.
Make sure that the power indicator (green) and the PC indicator (green) come on.
5
Run OLYMPUS Master from your PC.
For details on operating instructions, refer to the online manual of the OLYMPUS Master software.
Notes
• Do not change the setting of the Dock&Done/PC mode switch during data transfer. If the mode is changed, data
transfer stops and data is not stored correctly.
• Do not disconnect the USB cable during data transfer, otherwise transfer will stop and may cause data corruption.

Using the digital camera and the printer with a PC

When the digital camera and the printer are connected to the storage unit, the image files in the camera can be
browsed or printed from the connected PC. (Install the printer driver on your PC before using the printer.)
PC mode (available only when a PC is connected)
I O
Insert the power
cord plug into the
power outlet.
EN-23