ECOFOREST HIDROCOPPER Manual De Usuario página 21

(1)
The desired room temperature shall be adjusted here, regardless of the on-off setting; that is, if you only
wish to set the room temperature, this shall be done now.
4.2 Below there is a practical example of how to adjust the room temperature.
Supposing that you want to change the room temperature to 21 °C programmed at the factory to 19°C.
ECOFOREST
22:10 Friday
Water temp.
Pressure
MENU 1
User Program
1-0
Select language
1-2 Program 1
ON / OFF
1-2 Program 1
ON Week
1-2 0 7 : 0 0
ON Week
1-2 0 8 : 3 0
ON Week
1-2 0 8 : 3 0
ON Week
1-2 Program 1
ON / OFF
1-4 Temp / timer
programming
1-4b Thermostat
Mode
If you press MENU:

20 °C
1

20 °C
1.2 bar







21 °C 

19 °C


19 °C



The boiler is controlled through the thermostat, that is, once the desired
temperature is reached, the thermostat will put the level of fuel drop at the
minimum level, which is necessary for the boiler to get off. In order to activate
it, press the increase (
NO
with a "T" between the level of fuel and room temperature. When the boiler's
room temperature is cold, the mention related to the fuel level is replaced by
the mention "MINIMUM".
Only in water models, in air models it will enter in the
next step Menu 1- User programme.
Push the fuel increase key until:
Push the MENY key and you will see:
Push the MENU key until reaching the temperature 21°C.
Once you choose the temperature, push the decrease
key until fixing the desired temperature, in this example
19°C.
Push the fuel increase key until:
Push the MENU key until:
 ) button and you will see it is activated on the screen
20