Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
During operation, press the knob to pause the cooking process, the display will show "PAUSE".
You can open the lid, stir or mix food, remove the jar etc. then, place every element back in its
correct position and press the knob again to resume operation. After 10 minutes in "PAUSE", the
device will automatically turn off.
Use the knob to adjust all settings: time, temperature etc. Turn it clockwise to increase the
value and anticlockwise to decrease it.
TIMER
The display shows 88:88:88, as: hour:minutes:seconds.
Press the timer button once, the minute digits will flash. Turn the knob left or right to adjust the
desired minutes. Press it again to switch to seconds, the seconds digits will flash. Press it again
to switch to hours. Turn the knob left or right to adjust the desired hours.
During operation, press the timer button and the device will start counting down automatically.
If the timer has not been set, the product will operate with the preset times:
Heating (without blending): max. 12 hours.
Blending (speed 1-4): max 1 hour.
Blending (speed 5-10): max. 5 minutes.
SPEED
Press this button to enter speed-setting mode. The speed icon will flash on the display.
Turn the knob left to decrease speed and right to increase it, from level 1 to 10.
If the selected speed is 5-10, the timer will only be set up to 5 minutes. For the rest of the speed
options, 1 hour.
Warning:
When speed changes from 5 to 6 or when the device starts working, the device could emit
some noise. This is completely normal and does not affect the device's operation.
To crush or chop hard or large quantities of food, select speed 5 at first and then switch it to 10
to ensure perfect performance.
TEMPERATURE
Press this button to enter temperature-setting mode. The temperature icon will flash on the
display.
Turn the knob left to decrease the temperature and right to increase it, from 37 ºC to 120 ºC. The
selected temperature value will blink until the robot reaches the set temperature.
The temperature indicator will turn on red when the jar reaches very high temperatures, as a
warning to avoid burns.
If the temperature icon is red and you want to operate the machine at a high speed, reduce the
food quantity to below 1.5L.
32
HEATING POWER
Press this button to enter heat-power setting mode. The heat power icon will flash on the
display.
Turn the knob left to decrease heat power and right to increase it, from level 1 to 10.
Low heat power is suggested to cook fatty foods to avoid it from burning and small quantities
of food, as both require precise temperature and control.
High heating power will cook food much faster.
The heat power function will not activate unless the temperature is set too. It is suggested to
use the default setting for each temperature level.
SCALE
Mambo 8090 includes a built-in kitchen scale. It weights up to 4,999 grams, in a 1-gram
interval.
The robot must be paused to to use the scale tool. Tap the scale icon, the display will show "0
00 0" by default, indicating the scale has been activated. Ingredients are weighed as they are
introduces in the jar, and the display shows the exact value.
If there are ingredients inside the jar already and new ones are introduced, the scale will add
both values and the display will show the total weigh. If food is removed from the jar, the scale
will take away that weight from the total and will display the final value. The display might
show negative values when food is removed from the inside of the jar.
TARE FUNCTION
To restore the weight displayed and tare the scale with food inside the jar, tap the scale icon.
The display will show "0 00 0" again and the robot will be ready to weight new foods.
To quit the scale menu and return to pause mode, tap any of the robot icons. The display will
show the parameters previously set.
TURBO
When the robot is paused, press this button for the appliance to operate at maximum speed.
The display will show TURBO flashing.
Stop pressing the button for the appliance to stop operating under this function. The machine
will stop automatically.
This function can only operate for 1 minute maximum each time.
Warning: When the TURBO function is activated, the device could emit some noise. This is
completely normal and does not affect the device's operation.
FUNCTIONS
1.
Chop: Chops all kinds of ingredients, from meat or fish to fruit or vegetables. Perfect cuts
assured.
2.
Mince: Mince vegetables, meat, spices and crush ice easily in just a few seconds. Perfect
for processing raw ingredients.
ENGLISH
33
Publicidad
Tabla de contenido
