Cleaning And Maintenance - cecotec Mambo 9090 Manual De Instrucciones

ENGLISH
Suggested speed and capacity for each accessory
Accessory Image Function
Stainless Fig. 11 Chop (+)
steel blades
Chop (++)
MamboMix Fig. 12 Knead dough
spoon for bread,
pizza, etc.
Knead dough
for noodles
Butterfly Fig. 13 Stir
Whisk egg
whites or
cream
Steamer Fig. 14 Steam
vegetables
Steam meat

6. CLEANING AND MAINTENANCE

The stainless-steel jar is dishwasher safe.
Fig.15.
Warning: Assemble the part as shown below, only when the stainless-steel jar is washed in
the dishwasher.
The ceramic jar is not dishwasher safe. Clean it with lukewarm water and soap. Then rinse and
dry it thoroughly. Do not immerse or expose to water the connectors located on the bottom
part of the ceramic jar.
36
Speed Capacity Operation
time
5 2L max, chop 1 min.
1-2 cm
size before
operation
10 2L max, chop 1 min.
1-2 cm
size before
operation
2-3 5-20 min.
800 g dough
max.
3 400 g dough 3 min.
max.
1-3 2L max. 10 min.
4 2L max. 10 min.
N/A 3.5L max. 15 min.
N/A 3.5L max. 20-30 min.
Fig.16.
When cleaning the ceramic jar, be careful not to soak it in water and avoid the bottom part,
where the heating element is, from getting wet.
Clean the food processor after each use.
Turn off and unplug the appliance from the power supply and allow it to cool down before
cleaning it.
Wash the butterfly whisk and the rest of the accessories with warm soapy water. Rinse and
dry thoroughly.
Wipe the main body with a clean damp cloth. If food residue remains, dampen the cloth in
warm soapy water before wiping it. Never immerse the main body in water or other liquid.
In order to maintain the good performance of your appliance, check and clean the removable
bottom part of the jar after each use. Wipe it with a soft damp cloth and dry it thoroughly
before using it again.
If the appliance is not going to be used for a long time, unplug it from the power supply and
store it in a cool and safe place.
The blades and the MamboMix spoon are dishwasher safe.
7. TROUBLESHOOTING
Error code Description
E1 Safety switch
not fixed
E2 Temperature
sensor error
ENGLISH
Possible causes Solution
The jar or the jar's lid is Re-assemble the jar
not fixed and jar
properly. lid, make sure all the
parts are
assembled properly
and tightly
and try operating it
again.
The jar is not in its Re-assemble the jar
correct and make
position or connection sure, it is fixed
of the properly.
temperature sensor at
the jar
base is damaged.
37