Sanyo DSR-3000 Manual De Instrucciones página 27

SEARCHING FOR RECORDED IMAGES
Alarm thumbnail search
Alarm images can be searched for and played back from thumbnails.
All alarm images recorded in the alarm recording area are displayed as thumbnails.
Press the SEARCH FRAME/FIELD button during recording
1
or when the digital video recorder is stopped.
SEARCH
The SEARCH screen appears.
FRAME/FIELD
Use the jog dial to select ALARM THUMBNAIL SEARCH and
2
then turn the shuttle dial clockwise.
The last nine alarm recording images recorded appear.
The alarm number appears with each alarm recording image, and the alarm
number of the currently-selected alarm image flashes.
Use the jog dial to move the cursor in order to select the
3
images to be played back.
The alarm number of the currently-selected alarm image flashes.
Note:
•
•
Turn the shuttle dial clockwise.
4
The selected image appears in a single-screen display and playback starts.
Note:
•
•
Up to nine items of alarm information including thumbnails can be displayed.
When the jog dial is turned, the previous or next alarm information screen
appears.
To end this search mode, press the SEARCH FRAME/FIELD button.
You can also use the shuttle dial or jog dial to carry out operations such as
pausing and fast-forward playback.
Only the contents of each alarm can be played back, in the same way as for
alarm searching. Use the ALARM skip buttons to play back previous and
subsequent alarm recordings.
26
<SEARCH>
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
MOVE:JOG SELECT:SHUTTLE
<SEARCH>
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
MOVE:JOG SELECT:SHUTTLE SEARCH:EXIT
0109 0108 0107
0106 0105 0104
0103 0102 0101
0109 0108 0107
0106 0105 0104
0103 0102 0101
11-18-01 ALARM 0003
25:02:00 EN 0.10SEC
English