Sanyo DSR-3000 Manual De Instrucciones página 35

SAVING (COPYING) RECORDED IMAGES
A Copying images to the hard disk archive
area
1
Play back the images in the normal recording area or alarm
recording area that is to be copied, and pause playback at the
image that is to be copied. (See page 22.)
PLAY/STOP STILL
Example: To copy 10 seconds of images starting from a selected
image
2
While the image to be copied is displayed as a still image,
press the COPY button.
The copy screen appears.
COPY
3
Use the jog dial to select COPY TO and then turn the shuttle
dial clockwise.
The ARCHIVE AREA display flashes.
4
Use the jog dial to select ARCHIVE AREA and then turn the
shuttle dial clockwise.
The cursor moves to HOW MANY.
5
Turn the shuttle dial clockwise, use the jog dial to change
the setting to "10", and then turn the shuttle dial clockwise.
The cursor moves to PICTURES.
COPY TO : ARCHIVE AREA
HOW MANY : 1 PICTURES
START ->
FORMAT COMPACT FLASH ->
CHANGE WITH JOG. SET WITH SHUTTLE
COPY TO : ARCHIVE AREA
HOW MANY : 1 PICTURES
START ->
FORMAT COMPACT FLASH ->
CHANGE WITH JOG. SET WITH SHUTTLE
COPY TO : ARCHIVE AREA
HOW MANY : 1 PICTURES
START ->
6
Use the jog dial to select the SECONDS setting, and then
turn the shuttle dial clockwise.
•
PICTURES: Specify the number of images to be copied.
•
SECONDES: Specify the number of seconds of images to be
copied.
•
MINUTES: Specify the number of minutes of images to be
copied (up to 60 minutes).
The cursor moves to START.
7
Turn the shuttle dial clockwise.
Copying of images to the archive area starts. When copying is
complete, "COPY FINISHED" appears.
Note: If you press the COPY button while copying is in progress,
copying is canceled.
34
COPY TO : ARCHIVE AREA
HOW MANY : 10 PICTURES
START ->
COPY TO : ARCHIVE AREA
HOW MANY : 10 PICTURES
START ->
English