Daylight Saving Setting; Ext. Clock Set Setting - Sanyo DSR-3000 Manual De Instrucciones

LANGUAGE/CLOCK SET SETTINGS

DAYLIGHT SAVING setting

(default setting: USE)
This can be used to set the starting time and ending time for daylight
saving. When daylight saving is set, the time is automatically
advanced by one hour.
Example: To start daylight saving at 2.00 a.m. on the first Sunday
in April, and end it at 2.00 a.m. on the 4th Sunday in
October
1
When the cursor is at the MODE setting, turn the shuttle dial
clockwise.
"USE" flashes.
2
Turn the shuttle dial clockwise.
The cursor moves to the starting time (ON) entry line.
ON 1ST-SUN 04 02:00
3
Turn the shuttle dial clockwise.
"LST" (WEEK) setting flashes.
ON 1ST-SUN 04 02:00
4
Turn the jog dial clockwise to select " LST" , and then turn the
shuttle dial.
"SUN" (WEEK) flashes.
ON LST-SUN 04 02:00
5
Turn the jog dial clockwise to select " SUN" , and then turn
the shuttle dial clockwise.
"04" (MONTH) flashes.
6
Turn the jog dial clockwise to select " 04" , and then turn the
shuttle dial clockwise.
"02" (TIME) flashes.
2
1
7
Use the same procedure to set the end of summer time.
The cursor moves to ADJUST TIME.
English
<DAYLIGHT SAVING>
MODE : USE
WEEK MONTH TIME
ON 1ST-SUN 04 02:00
OFF LST-SUN 10 02:00
<EXT.CLOCK SET>
ADJUST.TIME 01:00
<DAYLIGHT SAVING>
MODE : USE
WEEK MONTH TIME
ON LST-SUN 04 02:00
OFF LST-SUN 10 02:00
<EXT.CLOCK SET>
ADJUST.TIME 01:00
43

EXT. CLOCK SET setting

(default setting: 01:00)
If more than two devices are connected at the same time, the time
settings (ADJUST TIME) for the digital video recorder are also applied
to these devices.
1
Connect the other devices to the input terminal (CLOCK
ADJUST IN) and output terminal (CLOCK ADJUST OUT) at
the rear of the digital video recorder.
ALARM
CLOCK
RESET ADJUST
ALARM ALARM
C IN OUT C IN OUT FULL
1st unit
CLOCK SET connection method:
Connect the C (COMMON) terminals of the first and second
digital video recorder, and then connect the CLOCK ADJUST
OUT terminal of the first one to the CLOCK ADJUST IN terminal
of the second one.
2
Turn the jog dial to move the cursor to the ADJUST TIME
setting, and then turn the shuttle dial.
"01" flashes.
3
Turn the jog dial to set the hours (example: " 05" ), and then
turn the shuttle dial.
2
1
4
Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT/OSD
5
Use the same procedure to set ADJUST TIME for the second
device.
When the settings are complete, the display returns to the normal
screen.
ALARM
CLOCK
RESET ADJUST
ALARM ALARM
C IN OUT C IN OUT FULL
2nd unit
<LANGUAGE/LANGUE/IDIOMA>
ENGLISH
<CLOCK SET>
01-01-2002 TUE 00:00:00
<DAYLIGHT SAVING>
MODE : USE
WEEK MONTH TIME
ON 1ST-SUN 04 02:00
OFF LST-SUN 10 02:00
<EXT.CLOCK SET>
ADJUST.TIME 01:00
<EXT.CLOCK SET>
ADJUST.TIME 05:00