Video Input Set Setting; Multiplexer Setting; Video Input Setting - Sanyo DSR-3000 Manual De Instrucciones

VIDEO INPUT SET SETTING

If you select a multiplexer (sold separately) that is connected to the digital video recorder, you can set the type of image input (digital or analog).
Main menu 1
<MAIN MENU 1>
1.LANGUAGE/CLOCK SET ->
2.VIDEO INPUT SET ->
3.RECORDING AREA SET ->
4.RECORDING CONDITIONS SET ->
5.NORMAL REC MODE SET ->
6.TIMER SET ->
7.HOLIDAY SET ->
8.ALARM REC MODE SET ->
TO MAIN MENU 2 ->
MOVE LINES WITH JOG. SELECT WITH SHUTTLE

MULTIPLEXER setting

(default setting: NO USE)
1
Press the MENU button to select VIDEO INPUT SET, and then
turn the shuttle dial clockwise.
The VIDEO INPUT SET sub-menu appears, and the cursor
moves to MULTIPLEXER.
MENU
2
Turn the shuttle dial clockwise.
"NO USE" flashes.
3
Turn the jog dial to select the MULTIPLEXER setting
(example: " SANYO" ), and then turn the shuttle dial
clockwise.
Display examples:
•
NO USE: When not using a multiplexer
•
SANYO: When using a Sanyo multiplexer
•
OTHERS1: When using a Sony multiplexer
•
OTHERS2: When using a Robot or DM multiplexer
The cursor moves to VIDEO INPUT.
2
1
Note: The multiplexers specified by SANYO and OTHERS1 are
capable of decoding channel information. Accordingly, you can
record images from these multiplexers using this digital video
recorder, and then use the digital video recorder's CHANNEL
button to select a camera number (channel information) for
playback.
Sub-menus
<VIDEO INPUT SET>
MULTIPLEXER : NO USE
VIDEO INPUT : ANALOG
<VIDEO INPUT SET>
MULTIPLEXER : NO USE
VIDEO INPUT : ANALOG
<VIDEO INPUT SET>
MULTIPLEXER : NO USE
VIDEO INPUT : ANALOG
<VIDEO INPUT SET>
MULTIPLEXER : SANYO
VIDEO INPUT : ANALOG
44
Sets the manufacturer of the connected
multiplexer.
Sets the video input.

VIDEO INPUT setting

(default setting: ANALOG)
This sets whether the image signals that are being input to the video
input terminals of this digital video recorder are digital or analog.
1
When the cursor is at the VIDEO INPUT setting, turn the
shuttle dial clockwise.
"ANALOG" flashes.
2
Turn the jog dial to select " DIGITAL (example)" , and then
turn the shuttle dial.
The cursor moves to MULTIPLEXER.
Note:
•
Select this if a Sanyo digital transport multiplexer (MPX-CD163
or CD93) has been connected digitally.
•
When making a multiplexer and a digital connection, first
connect the VIDEO OUT connector of this unit to the monitor,
and then set the input signal to "DIGITAL".
2
1
3
Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT/OSD
Note:
•
If the MULTIPLEXER setting is set to something other than "NO
USE", SENSOR cannot be selected as the ALARM TRIGGER in
the ALARM REC MODE SET menu.
When using a multiplexer, use the motion sensor function of the
multiplexer.
•
If using a multiplexer manufactured by SANYO or some other
manufacturer in analog connection mode, connect the SW OUT
terminal at the rear of this unit to the SW IN terminal of the
multiplexer. This is not necessary if using a SANYO multiplexer in
digital connection mode.
<VIDEO INPUT SET>
MULTIPLEXER : SANYO
VIDEO INPUT : ANALOG
<VIDEO INPUT SET>
MULTIPLEXER : SANYO
VIDEO INPUT : DIGITAL
English