Garland 1190 TQG Manual De Instrucciones página 30

English
Make sure that the machine has passed the adequate
maintenance controls. All damage caused by the use
of defective, worn out or non original parts, annuls the
warranty responsibility of the manufacturer.
Maintain your face and body as far away from the
machine as possible. Whilst introducing the wood into
the machine for shredding, maintain both feet at the
same level as those of the wheels.
Turn off the machine, disconnect the spark plug and
make sure that the cutting tool has stopped before
making any adjustments, filling with fuel, changing
accessories, cleaning, transportation and storage of
this machine. Such preventive safety measures reduce
the risk of accidental starting of this machine.
Never tilt the machine when the engine is running.
Replace the caution signs if damaged or if not legible.
Do not tilt the machine with the engine running.
Reduce the engine speed when shutting down the
engine and if the engine has a petrol closing valve,
then close this valve when the engine is not running.
2.6. SERVICE
Please periodically check your machine by a qualified
repair service using only identical replacement parts.
This will ensure that the safety of this machine is
maintained.
30/148