Rinsing Cycle - Pacojet Junior Manual De Instrucciones

8.1.4

Rinsing cycle

Complete the following steps:
1. Switch on the Pacojet Junior at the mains switch (5).
The device switches to "operating mode".
The device is ready for operation.
If the device is in "standby mode", operate the "START
KEY" to switch to "operating mode".
2.
Insert the empty pacotizing beaker (10) into the
protective beaker (12).
3.
•
•
Insert the pacotizing blade (9) into the rinsing
insert (13) by inserting its hollow component into the
hole in the rinsing insert.
While doing so, make sure that the flat side of the
rinsing insert is pointing downwards towards the
pacotizing blade.
Caution
Risk of injury due to incorrect
handling of the pacotizing
blade!
Never touch the sharp edges of
the pacotizing blade (9).
Always hold the pacotizing blade
with two fingers at the corners
between the blades!
25
EN