Publicidad
Idiomas disponibles
Idiomas disponibles
User manual
Transmitted optical return power level indicator
- L9 will tell us that the power transmitted by the return laser is
the adequate amount.
Optical input power level indicators
- L1 (red) will light up when the incident optical power
is greater than 2dBm; in this situation L2 to L7 will
remain lit. As the incident optical power drops, L1 to
L7 will switch off until the optical power reaches -
5dBm which will light up L8 (red) with the rest (L1-
L7) remaining switched off. L4 will light up when
incident power exceeds -1.5dBm.
L1
L9
L2
L3
L4
L5
L6
L7
L8
TX optical return
output
TV Attenuator
LASER APERTURE
LASER CLASS 1M
SAT
Optical input
Equaliser
Precaution.-
The use of control or adjustment devices or operating
parameters other than those specified in this manual, may
result in exposure to harmful radiation.
12
F.O. Receiver Ret. Outdoor
Power supply
TV Equaliser
SAT
Attenuator
RF output
Direct FX optical
input
Mains
196-264V~
Earthing
Test
Publicidad
