Using The Bluetooth Mobile Phone; Using The Bluetooth Audio Player - JVC KW-ADV65BT Manual De Instrucciones

Bluetooth operations
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately purchased) to the
LINE IN terminals on the rear of the unit. (☞ Installation/Connection Manual)
• KS-BTA100 is not available in some countries. Please contact your dealer where you purchased this unit.
• For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
• Operations may be different according to the connected device.
Preparation
1
Register (pair) a Bluetooth device with KS-BTA100.
• Refer to the instructions manual supplied with KS-BTA100.
2
Select [BT] for <AV Input>.

Using the Bluetooth mobile phone

KS-BTA100
(Low)
(Press)
Microphone
(Hold)
About microphone volume:
• When you turn off the power of the unit, the volume level changes to Normal.

Using the Bluetooth audio player

1
Select "Bluetooth" as the source.
KS-BTA100
for KW-AV6 1
(☞ page 47)
Adjusting the microphone volume
Volume level: High/Normal (initial)/Low
(High)
• Receiving a call
When a call comes in...
• Making a call
Making a call to the last connected number from your phone.
• Switching between handsfree and phone
While talking...
• Ends/rejects call
• Voice dialing
Voice dialing is available only when the connected mobile phone
has the voice recognition system.
(☞ page 12)
Starts/pauses playback.
• If playback does not start, operate the Bluetooth audio player to
start playback.
• Selects a track. (Press)
• Fast-forwards or reverses the track. (Hold)
61