Fitting To The Floor - Fronius Acctiva Professional Flash UCN US Instrucciones De Uso

Fitting to the
floor

Fitting to the floor

370 mm
42 mm
6
Fit the charger to the floor using the
optional fitting brackets:
1. Insert the fitting bracket into the left
and right-hand sides of the ventilation
grille on the charger's front panel, and
do the same on the rear panel
2. Mark the location of the holes on the
mounting surface (see diagram for
measurements)
3. Drill holes
4. Select the most suitable screws for
fastening the charger according to the
nature of the mounting surface
(diameter 5 mm)
5. Fasten charger to the mounting
surface using fitting brackets, each
with two screws