Charge Acceptance Test Finished - Battery Faulty - Fronius Acctiva Professional Flash UCN US Instrucciones De Uso

Charge accep- Important: A fully-charged battery can also return a negative test result. In this case the
tance test fini- battery must be discharged (see chapter entitled Charge acceptance test - Preparations)
shed - battery
faulty
1.
2.
3 . If the terminals are disconnected from the battery in this mode, the charger reverts
The charge acceptance test shows that the battery is faulty. The battery receives no
further charge. The result is displayed on the screen:
E.g.: charging current
Press the Info button to retrieve the following parameters:
E.g.: battery voltage
E.g.: Battery's capacity to
accept charge, expressed
in %
to the Operating Mode menu.
- the top half of the display shows
the result of the charge acceptance
test (if the result is negative, „Test
Fail" is displayed)
- the bottom half of the display shows
the calculated parameters
E.g.: set battery capacity
18