Miele UG 6163 Instrucciones De Montaje página 26

Produktgruppen 512, 592
26 von 26
Extend the connection between the machine drain outlet and the on-site drain by approximately 170 mm.
Lower the machine and return it to its original position.
Check that the machine is perfectly level in all directions.
If necessary, level the machine by installing spacer plates as appropriate.
Install the floor mounting bolts through the brackets in the existing holes, Fig. 3, Pos. 1.
Install the 2 stand front panels (Fig. 3, Pos. 2) at the front and back, and align them with the corners of the machine.
Install the 2 stand side panels (Fig. 3, Pos. 3). Readjust the 2 front panels, if necessary.
Reinstall the 2 side panels and 2 service panels.
Carry out appropriate electrical safety checks.
Reconnect the machine to the power supply and the steam supply (if applicable).
am
02.03.2012 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
M.-Nr. 07564361