Installing The Subwoofer Horizontally; Activating Wireless Transmission Between Specific Units (Secure Link) - Sony HT-CT390 Manual De Instrucciones

2
Prepare screws (not supplied) that
are suitable for the holes in the
brackets.
More than 30 mm (1
4.6 mm
3
( / in)
16
10 mm
13
( / in)
32
Hole in the bracket
3
Fasten the screws to 2 studs in the
wall.
The screws should protrude by
5 mm to 6 mm (approx.
560 mm (22
5 mm to
6 mm
(approx.
7
/ in)
32
4
Hang the Bar Speaker on the
screws.
Align the holes in the brackets with
the screws, then hang the Bar
Speaker on the two screws.
3
4 mm ( / in)
16
3
/ in)
16
7
/ in).
32
1
/ in)
8
Installing the subwoofer
horizontally
Place the subwoofer on the right side
with the "SONY" logo facing front.
Attach the supplied speaker pads.
Activating wireless
transmission between
specific units (Secure
Link)
You can specify the wireless connection
to link the Bar Speaker to the subwoofer
using the Secure Link function.
This function can help prevent
interference if you use multiple wireless
products or your neighbors use wireless
products.
1
Press MENU.
2
Press / to select "WS >", then
press ENTER.
21
US