Attaching The Grille Frame - Sony HT-ST9 Manual De Instrucciones

2
Fasten the screws to two studs in the wall.
The screws should protrude by 11 mm to 12 mm (approx. 7/16 in).
11 mm to
12 mm
(approx.
7/16 in)
3
Hang the Bar Speaker on the screws.
Align the holes at the rear of the Bar Speaker with the screws,
and then hang the Bar Speaker on the two screws.
Note
When you use the HDMI IN 3 jack of the wall-mounted Bar Speaker,
connect a right-angled HDMI cable (High Speed HDMI Cable with
Ethernet).
38
US
939 mm (36 49/50 in)

Attaching the Grille Frame

Attach the grille frame in parallel with the front panel.
Note
We recommend that you use the system without attaching the grille
frame if you will be listening to High-Resolution Audio.