Numark AVMO2 Manual De Inicio Rápido Del Usuario página 8

Specifications
Audio
Inputs
Line
Mic
Phono
Outputs
Line
Headphone
Distortion
Signal to Noise Ratio (maximum output) JIS-A weighted
Line
Mic
Phono
Frequency Response
Line
Mic
Phono
EQ
Channel EQ
Bass
Mid
Treble
DJ Mic EQ
Bass
Treble
Video
Composite Video Input (4)
Pin-Jack Y/C Video input (4)
Composite Monitor output (4)
Pin-Jack Composite Monitor
output (2):
Pin-Jacks Y/C Video output (2)
Signal to Noise Ratio (Video)
Dimensions
LxWxH 482.6 x 228 x 105mm
Weight 5Kgs
10Kohm input impedance
80mV rms sensitivity for 0dBm output
600ohm input impedance unbalanced
1.7mV rms sensitivity for 0dBm output
300mV rms max input
47Kohm input impedance
1.0mV rms sensitivity @1KHz for 1.22V output
7V rms max
0.5W into 47 ohm
Less than 0.01%
Better than 90.dB
Better than 88dB
Better than 83dB
20Hz-20KHz ±0.5dB
20Hz-15KHz ±0.5dB
±1dB except for controlled attenuation of –3dB@20Hz to reduce
rumble and feedback
+12/-32dB @60Hz
+12/-32dB @1.2KHz
+10/-20dB @15KHz
±10dB @100Hz
±10dB @15KHz
1.0 Vp-p 75Ω NTSC (PAL/SECAM) composite signal
Y signal: 1.0 Vp-p 75Ω, Mini Din 4-pin connector
C signal: 0.3 Vp-p 75Ω, Mini Din 4-pin connector
1.0 Vp-p 75Ω NTSC composite signal
1.0 Vp-p 75Ω NTSC (PAL/SECAM) composite signal
Y signal: 1.0 Vp-p 75Ω
C signal: 0.3 Vp-p 75Ω
48dB (composite), 50dB (Y/C)
8