Top Panel Overview - Numark AVMO2 Manual De Inicio Rápido Del Usuario

Top Panel Overview

1. Microphone Channel: Controls for the front panel mic input.
2. Channel Section (CH1, CH2, CH3, CH4): Controls tone, level, and assignment of each of the 4
main mixer channels.
3. Meter/Crossfader Section:
another.
4. Output Section: Adjustments for the main outputs, booth outputs and headphone outputs.
5. Auto Fade: Turns auto fade mode on and off to allow for smooth transitions from one source to
another.
6. Video A & B Bus Controls: Assigns a video source to the A bus (left side) or B bus (right side) of
the mixer, allowing you to use the effect buttons and special transitions.
7. Key/Wipe Controls: Controls fades, wipes and picture in picture settings.
8. Joystick Control & Color Button: The Joystick is used to control the screen position of the PIP
and video wipes. The color button is used to select the desired color for background effects and
chroma key mode.
Audio Section
Microphone Channel
DJ Mic: Connect your 1/4" or XLR microphone here.
Treble: Adjusts the high frequency sounds of the DJ mic from -10dB to +10dB.
Bass: Adjusts the low frequency tone of the DJ mic from -10dB to +10dB.
Mic Gain: Adjusts the volume of the microphone connected to the DJ MIC input.
When not using the microphone, keep this knob at its lowest setting.
Video and audio crossfaders for transitioning from one source to
4