Steren MUL-265 Manual De Instrucciones página 26

CAUTIONS
Before using the product, carefully read this instruction manual to avoid any
malfunction.
The information presented serves only as a reference on the product. Due to
updates there may be differences. See our website www.steren.com for the
latest version of this manual.
• Improper useter can cause damage, electric shock, or serious injury.
• Always remove test leads before replacing batteries or fuses.
• Check the condition of the test leads and the meter itself before operating.
• Do not measure voltages exceeding 1000V above ground; Can be risky.
• Be very careful when taking measurements if the voltages are greater than 30
VAC RMS or 60 VDC; These voltages are considered a danger of electric shock.
• Always discharge the capacitors and cut off the power of the device before
performing diode, resistance or continuity tests.
• To prevent damage to the Meter, do not exceed the maximum limits of the
input values shown in the specifications
• Remove the batteries if there is a prolonged period of inactivity.
• This product is not a toy; Keep out of children reach.
• This appliance is NOT intended for use by persons with different capacities,
unless properly prepared and supervised.
• Do not use the Meter if the battery cover is not in place and fully closed.