Advanced Settings; Changing The Settings; Operating The Initial Setup Screen - Pioneer BDP-440 Manual De Instrucciones

BDP-140_UCXCNSM_IBD_EN.book Page 40 Tuesday, July 19, 2011 10:54 AM
Chapter 7
07

Advanced settings

Changing the settings

Note
• Items that cannot be changed are indicated in gray. The items that can be selected depend on the player's status.
• In Options, the factory default settings are indicated in bold.
Setting Options
16:9 Full
TV Screen
16:9 Normal
4:3 Pan&Scan
4:3 Letterbox
Video Adjust Brightness
Contrast
Hue
Saturation
Sharpness High
Middle
Low
Video Mode Standard
Vivid
Cinema
Custom
0
Noise Reduction
1
2
3
40
En
Operating the Initial Setup
screen
1 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
2 Select and set Initial Setup.
Use / to select, then press ENTER.
3 Select the item and change the setting.
Use /// to select, then press ENTER.
 Closing the Initial Setup screen
HOME MENU or EXIT.
Press
Explanation
Select this when connecting to a wide (16:9) TV.
Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with the left and right sides of the image cut off to display
on the 4:3 screen. (This function works if the disc is labeled for 4:3PS.)
Select this when connecting to a conventional (4:3) TV.
Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with black bands at the top and bottom.
Select this to adjust the TV screen's brightness .
Select this to adjust the TV screen's contrast.
Select this to adjust the color (green and red) balance of the TV screen.
Select this to adjust the TV screen's saturation .
Choose the level of sharpness.
Choose the video output mode.
Choose the level of noise reduction.