Connecting Video And Audio Cables; Connecting A Tv Using A Video/Audio Cable; Connecting An Av Receiver Or Amplifier Using An Optical Digital Audio Cable - Pioneer BDP-440 Manual De Instrucciones

BDP-140_UCXCNSM_IBD_EN.book Page 20 Tuesday, July 19, 2011 10:54 AM
Connecting video and
02
audio cables
Note
• Make the settings in the Setup Navigator menu
according to the type of cable connected (page 24).
• To output video signals from this player, connect
using a video cable (not including when connected
using an HDMI cable).
Connecting a TV using a
video/audio cable
Caution
• Connect the player's video output directly to
your TV.
This player supports the analog copy protection
technology. Therefore, the picture may not be
displayed properly if this player is connected to a TV
via a DVD recorder/video deck or when playing the
player's output material that is recorded by a DVD
recorder/video deck. Furthermore, the picture may
not be displayed properly due to the copy protection
when the player is connected to a TV with a built-in
video deck. For details, contact the manufacturer of
your TV.
BDP-440
Player's rear panel
Yellow
White
Red
It is also possible to connect to
an AV receiver or amplifier.
Connect the audio signals using
an optical digital audio cable or
an audio cable (2 channels) (on
the right column).
Direction of
signal flow
To video/audio input terminals
20
En
BDP-140
Direction of
signal flow
Note
• Video signals are output with a resolution of 576/50i
or 480/60i when this player is connected using a video
cable.
• Depending on the output video resolution setting, the
picture may not be output.
Connecting an AV receiver or
amplifier using an optical
digital audio cable
BDP-440
Optical digital audio
cable (commercially
To optical digital
audio input terminal
AV receiver or
amplifier
TV
Player's rear panel
Red
Yellow
It is also possible to connect to
an AV receiver or amplifier.
Connect the audio signals using
an optical digital audio cable or
an audio cable (2 channels)
(page 21).
To video/audio input terminals
TV
Player's rear panel
White
Red
Video/audio cable
(included)
available)
2-channel analog
audio can also be
connected.
To audio input terminals
Direction of signal flow