Connecting To The Network Through Lan Interface; Connecting To A Wireless Lan - Pioneer BDP-440 Manual De Instrucciones

BDP-140_UCXCNSM_IBD_EN.book Page 22 Tuesday, July 19, 2011 10:54 AM
Connecting to the
02
network through LAN
interface
By connecting this player to the network via the LAN
terminal, you can play audio files stored on the
components on the network, including your computer,
using HOME MEDIA GALLERY inputs.
BDP-440
Player's rear panel
LAN cable
(commercially
available)
PC
BDP-140
Player's rear panel
LAN cable
(commercially
available)
PC
Connect the LAN terminal on this receiver to the LAN
terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or
22
higher).
En
Turn on the DHCP server function of your router. In case
your router does not have the built-in DHCP server
function, it is necessary to set up the network manually.
For details, see Setting the IP address on page 44 .
 LAN terminal specifications
LAN terminal: Ethernet jack (10BASE-T/100BASE-TX)
Note
• Refer to the operation manual of the equipment you
have as the connected equipment and connection
method may differ depending on your Internet
environment.
• When using a broadband Internet connection, a
contract with an Internet service provider is required.
Internet
For more details, contact your nearest Internet
service provider.

Connecting to a wireless LAN

Wireless connection to the network is possible through a
Modem
wireless LAN connection. Use the separately sold
AS WL300 for connection.
-
• Refer to the operating instructions of AS-WL300 for
the setting details.
Router
BDP-440
LAN
3 2 1 WAN
LAN cable
(commercially available)
Internet
(included with the AS-WL300)
Modem
Wireless LAN converter
Router
LAN
3 2 1 WAN
LAN cable
(commercially available)
Player's rear panel
Internet
Modem
LAN/USB feeder cable
Router
(AS-WL300)
DC 5V Ethernet WPS
WAN